Jump to content
  • WELCOME GUEST

    It looks as if you are viewing PalmTalk as an unregistered Guest.

    Please consider registering so as to take better advantage of our vast knowledge base and friendly community.  By registering you will gain access to many features - among them are our powerful Search feature, the ability to Private Message other Users, and be able to post and/or answer questions from all over the world. It is completely free, no “catches,” and you will have complete control over how you wish to use this site.

    PalmTalk is sponsored by the International Palm Society. - an organization dedicated to learning everything about and enjoying palm trees (and their companion plants) while conserving endangered palm species and habitat worldwide. Please take the time to know us all better and register.

    guest Renda04.jpg

Recommended Posts

Posted

I'd like to start taking measure of how much water I'm using in real time. I don't want to fiddle and diddle with the street meter.

Sooner or later, the state or local water companies will start restricting water usage unless we get a lot of rain soon. Which could happen, but I'd rather act than pray.

Anyone have experience regarding hose end water meters that will measure usage?

Please don't just send links to Corporate Welfare Inc. (Amazon Wal*Mart, etc.)

Thanks!

Let's keep our forum fun and friendly.

Any data in this post is provided 'as is' and in no event shall I be liable for any damages, including, without limitation, damages resulting from accuracy or lack thereof, insult, or lost profits or revenue, claims by third parties or for other similar costs, or any special, incidental, or consequential damages arising out of my opinion or the use of this data. The accuracy or reliability of the data is not guaranteed or warranted in any way and I disclaim liability of any kind whatsoever, including, without limitation, liability for quality, performance, merchantability and fitness for a particular purpose arising out of the use, or inability to use my data. Other terms may apply.

Posted

Dave with my work we usually use Endress and Hauser flow meters/totalizers but they are probably too expensive for any home owner.  You might want to try something along the lines of this.

https://www.flows.com/3-4-home-water-meter/?gclid=Cj0KCQjwpreJBhDvARIsAF1_BU0rBdItDpHuOUgeEbT7LQPdg73MMgM8Q8Ne1rIGdC5iyf1FvOylF8caAvRXEALw_wcB

These analog flowmeters/totalizers tend to be reliable they only have a small paddle wheel inside.   

  • Like 1
  • Upvote 1
Posted
  On 8/31/2021 at 4:16 PM, Chester B said:

Dave with my work we usually use Endress and Hauser flow meters/totalizers but they are probably too expensive for any home owner.  You might want to try something along the lines of this.

https://www.flows.com/3-4-home-water-meter/?gclid=Cj0KCQjwpreJBhDvARIsAF1_BU0rBdItDpHuOUgeEbT7LQPdg73MMgM8Q8Ne1rIGdC5iyf1FvOylF8caAvRXEALw_wcB

These analog flowmeters/totalizers tend to be reliable they only have a small paddle wheel inside.   

Expand  

Thanks!

Let's keep our forum fun and friendly.

Any data in this post is provided 'as is' and in no event shall I be liable for any damages, including, without limitation, damages resulting from accuracy or lack thereof, insult, or lost profits or revenue, claims by third parties or for other similar costs, or any special, incidental, or consequential damages arising out of my opinion or the use of this data. The accuracy or reliability of the data is not guaranteed or warranted in any way and I disclaim liability of any kind whatsoever, including, without limitation, liability for quality, performance, merchantability and fitness for a particular purpose arising out of the use, or inability to use my data. Other terms may apply.

Posted

Seems like you should install drip irrigation for the future, Dave.  

  • Like 1

Formerly in Gilbert AZ, zone 9a/9b. Now in Palmetto, Florida Zone 9b/10a??

 

Tom Blank

Posted
  On 9/1/2021 at 1:21 PM, sonoranfans said:

Seems like you should install drip irrigation for the future, Dave.  

Expand  

I've thought about it, but drip has hassles and problems of its own.

There's the expense and logistics of laying out the system, and purchasing the parts.

The "spaghettis" to the emitters from the pipes have to be inspected regularly, and replaced if they break. (Or, some moron trips over them, and breaks them.)

The emitters in the pots have to be inspected regularly as they can clog with salts, or break.

The flexible plastic pipes and spaghettis sometimes get chewed by animals like raccoons and coyotes and used as drinking fountains.

That last I have a bit of personal experience with. My first California job was at a wholesale nursery in Irvine, and one of my jobs was to check the drip system. That was a big system, and it was a big job. Something, apparently an animal, kept puncturing the flexible pipes and "repellants" didn't work to stop it.

Eventually, one of the laborers caught some coyotes doing it for a drink of agua; the coyotes were trapped, collared and released in another location. When they returned and did the puncture trick again, they were trapped and euthanized. The problem stopped. (Still a bummer.)

So, while drip definitely has its merits, "set and forget" as has been pitched to me, is a myth.

That said, I might still do one for the potted plants.

Let's keep our forum fun and friendly.

Any data in this post is provided 'as is' and in no event shall I be liable for any damages, including, without limitation, damages resulting from accuracy or lack thereof, insult, or lost profits or revenue, claims by third parties or for other similar costs, or any special, incidental, or consequential damages arising out of my opinion or the use of this data. The accuracy or reliability of the data is not guaranteed or warranted in any way and I disclaim liability of any kind whatsoever, including, without limitation, liability for quality, performance, merchantability and fitness for a particular purpose arising out of the use, or inability to use my data. Other terms may apply.

Posted

Sounds like you have had way worse problems than I did in arizona.  I was told never use emitters that were rated for 1gph or less as they always clogged.  My 2gph emitters were good for about 5 years and were easy to check.   I did bury my lines so not problems with tangling.  With a mature garden, might be microsprayers are best and you dont need so many.  Straight up hose watering probably uses 4x the water, the best water savings is to control each area volume wise and water slowly over night for 4-5 hours.  If soil drains fast, drippers will not improve water use efficiency much and might stunt palms with dry spots.  The more soil surface area you wet, the more are the evaporative losses.  If you have clay, the soil can be wet underneath but not as much on the surface.

Formerly in Gilbert AZ, zone 9a/9b. Now in Palmetto, Florida Zone 9b/10a??

 

Tom Blank

Posted

Dave, you should investigate the latest drip products, like Techline EZ 12mm.  Also, the water meter link is for IPS thread, (plumbing), not hose thread.

San Francisco, California

Posted
  On 9/1/2021 at 1:55 PM, DoomsDave said:

I've thought about it, but drip has hassles and problems of its own.

I only use 1/2" poly pipe.  I can buy 500' rool from HD for like $60 here and I"m sure much cheaper on the mainland.  I don't use that thin tubing for the same reasons you mentioned.  I don't "drip" I have little spray heads  and run the 1/2 poly right to the palms.  They work for years but I do have to wander the 2 acres and make sure the timers are working once a week.  If I see a sudden growth of grass or other weeds then I know there is a leak near by.

Expand  

 

Borassodendron machadonis20210829_111800.jpg

Steve

Born in the Bronx

Raised in Brooklyn

Matured In Wai`anae

I can't be held responsible for anything I say or do....LOL

Posted

Most emitters are a pain because they clog why did that plant die check the soil and it’s dry check the emitter and it’s not working I switched to bowsmith emitters and haven’t had a problem yet they are pricey but so what if you don’t have dead plants. I have also tried a product called netafim and I would like it but I don’t cover it and their t’s  and elbows are garbage and always breaking 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...