Jump to content
IMPORTANT ANNOUNCEMENT ABOUT LOGGING IN ×
  • WELCOME GUEST

    It looks as if you are viewing PalmTalk as an unregistered Guest.

    Please consider registering so as to take better advantage of our vast knowledge base and friendly community.  By registering you will gain access to many features - among them are our powerful Search feature, the ability to Private Message other Users, and be able to post and/or answer questions from all over the world. It is completely free, no “catches,” and you will have complete control over how you wish to use this site.

    PalmTalk is sponsored by the International Palm Society. - an organization dedicated to learning everything about and enjoying palm trees (and their companion plants) while conserving endangered palm species and habitat worldwide. Please take the time to know us all better and register.

    guest Renda04.jpg

TEC b-472 tag printer


TexasColdHardyPalms

Recommended Posts

I have an older TEC 472 printer. You will need an older serial cable computer, some IT savvy and the tag template/software which I can tell you where to purchase along with the tags.  These systems cost $2500 if you buy them turn key. I'm selling this printer for $200 plus shipping. Software costs roughly $150 when I purchased a few years ago.  It print thick tags on a 500ct roll.  Very durable and the label wont fade or rub off as it's a thermal transfer. 

15973445436824966432767180361536.jpg

20200813_134235.jpg

  • Like 1
Link to comment
Share on other sites

  • 2 years later...

I have big problems printing with VPE on a TEC B472 label printer. I have tried different drivers and all seems to behave differently. With the driver on Seagull homepage: TEC TPCL Driver Version:7.1.4, the printout is approximately 2 mm too long. I print 25 mm high label, but as each printed label become 27 mm, the labels are displaced.

I use the transmissive sensor so the printer should adjust each label automatically. If I print directly to the printer port using internal control codes of the printer, it work. , also tried other dirvers where labels where printed OK with VPE, but then there were other problems instead. One driver worked as expected when printing to LPT1:, but not when printing to COM1:. There are a lot of TEC B472 printers in use only equipped with a com1-port and my program should preferably also work with these printers.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...